Welldoor Engineers

"WELLDOOR" Hollow Metal Pressed Steel Doors, Windows & Frames

Corporate Finance Facility Available Throughout the World

Flush Type		Rib Type

Double Sheet Flush	Single Sheet Flush	Single Sheet Panelled	Double Sheet

HMPS (HOLLOW METAL PRESSED STEEL) Doors alongwith frames are made from 1.25 mm thick CRCA / Galvanized sheets (18 swg). If desired & if found necessary, higher thickness sheet can be used. Doors can be of Flush type or Rib type. Suitable stiffners provided to give extra strength. Insulation could be of glass-wool, thermocole, rigid polyurethene etc.. View panels of various sizes, (horizontal/vertical) fan-lights can be provided if desired. The glass shall be fixed in a rubber beeding with retaining Aluminium channel. Fittings can be of M/S, Aluminium, Brass, etc.. Mortice lock, tubular latch can also be fitted.

Table
Description	Double Sheet Flush	Single Sheet Flush	Single/Double Sheet Panelled	Door/Window Frames
1.Thickness
Frame	18 swg (1.25 mm)	18 swg (1.25 mm)	18 swg (1.25 mm)	18 swg (1.25 mm)
Shutter	18 swg (1.25 mm)	18 swg (1.25 mm)	18 swg (1.25 mm)	--
2.Bracing	Internal	External	External / Integral	--
3.Insulation	Ö	--	--	--
4.View Panels	Ö	Ö	Ö	--
5.Fittings	Ö	Ö	Ö	Ö
(Fittings as per customer's choice)

Table

Description Double Sheet Flush Single Sheet Flush Single/Double Sheet Panelled Door/Window Frames

1.Thickness

Frame 18 swg (1.25 mm) 18 swg (1.25 mm) 18 swg (1.25 mm) 18 swg (1.25 mm)

Shutter 18 swg (1.25 mm) 18 swg (1.25 mm) 18 swg (1.25 mm) --

2.Bracing Internal External External / Integral --

3.Insulation Ö -- -- --

4.View Panels Ö Ö Ö --

5.Fittings Ö Ö Ö Ö

(Fittings as per customer's choice)

Note:-

Standard Thickness of material is 1.25 mm. For bigger sized doors, the thickness of material used shall be greater.
Doors can be made as per thickness required by customer from 0.6 mm to 1.6 mm.

Door & Window Frame Sections

Material Used:- M.S. / G.I. / S.S.
Material Thickness:- Ranging from 1 mm to 3 mm depending on size of door.
Profile:- Single grooved OR Double grooved as per I.S. / B.S.
Hinges:- Butt hinges screwed to the frame. If desired pin type hinges with bearings can also be supplied.
Miscellaneous:- Rubber buffers, necessary punch outs for latch, Mortar Guards etc. provided.

Click for windows

Click for any quarry regarding this site or anything else
This Site is developed & Hosted by UTPAL SHAH & GAURANG SHAH

Door & Window Frame Sections

Material Used:- M.S. / G.I. / S.S. Material Thickness:- Ranging from 1 mm to 3 mm depending on size of door. Profile:- Single grooved OR Double grooved as per I.S. / B.S. Hinges:- Butt hinges screwed to the frame. If desired pin type hinges with bearings can also be supplied. Miscellaneous:- Rubber buffers, necessary punch outs for latch, Mortar Guards etc. provided.